The LED light therapy machine uses high-purity single wavelength, high-power density red, blue, green, and yellow light to irradiate the skin, and achieves the treatment of acne through the antibacterial and anti-inflammatory effects of blue light and the skin lesion repair effect of red light.
Litonlaser began its research on LED photodynamics in 2012. Through a lot of self-research and clinical experiments, it has determined the different effects of different colors of light on skin beauty. As an LED machine, it can output multiple colors of light at the same time, which means multiple wavelengths of laser. Therefore, the LED phototherapy machine is multifunctional and can treat different skin problems.
Let’s follow me to learn more about Litonlaser’s 7 color LED Phototherapy machine.
1. Working principle of LED phototherapy.
1.1 Red LED light therapy.
It can be fully absorbed by fibroblasts, enhance cell activity, repair damaged cells, promote collagen production and elasticity, and make the skin smooth. At the same time, it can also achieve good results in removing pigmentation and reducing sun damage.
1.2 Blue LED light therapy.
When LED blue light irradiates acne, it can effectively apply almost all energy to the target-Propionibacterium acnes, by stimulating porphyrins in skin enzymes and releasing a large amount of singlet active oxygen, thereby eliminating Propionibacterium acnes, and then eliminating inflammation and acne. In addition, blue light can also inhibit the vigorous secretion of sebaceous glands and balance the oil secretion of the skin. It can not only effectively remove acne, but also improve the problem of large pores.
1.3 Green LED light therapy.
The natural and soft light color has the effect of neutralizing and calming nerves, which can improve anxiety or depression; regulate the function of skin glands, effectively dredge lymph and remove edema, and improve oily skin, acne, etc.
1.4 Yellow LED light therapy.
It has the active effects of accelerating blood circulation, activating cells, and stimulating cell excitability; it can promote collagen synthesis, strengthen the collagen fibers and elastic fibers of the skin, and terminate and stop skin redness.
2. Features of LED light therapy machine.
LED light therapy machine uses a narrow spectrum light source to emit a cold light, which does not generate high heat and will not burn the skin. It converts light energy into intracellular energy and is one of the safest and most effective equipment for treating acne and skin rejuvenation.
- Non-contact, non-invasive treatment, quick effect, short course of treatment, no side effects;
- The treatment of the entire face can be completed at one time, and the patient can leave immediately after treatment;
- The light source output intensity is stable, the treatment dose is accurate, and the light source life is long;
- No heat, no ultraviolet rays, and no pigmentation;
- It can effectively enhance the activity of skin collagen cells and smooth fine wrinkles
- Diminish age spots and reduce solar skin damage;
- Reduce the erythema and capillary dilation of rosacea;
- Simple and convenient operation, medical staff can master it after simple training.
3. Advantages of machine treatment.
- Provide you with an alternative to oral antibiotics for acne treatment.
- The treatment process is pleasant, painless, no anesthesia, and no recovery time.
- It is effective quickly, with 8 treatments in one course, and the effect is obvious.
- It is safe and has no side effects.
- Red LED light therapy has a good effect on skin rejuvenation and other skin disease treatments.
4. Indications and contraindications of LED therapy.
The LED machine has the following functions:
- Clear acne: pimples, acne, blackheads; desensitize, dark spots.
- Improve melting spots, whitening, brightening, shrinking pores, grayish yellow complexion, nerve numbness.
- Eliminate wrinkles, fatigue, relieve stress, and improve sleep.
- Repair damaged skin, refine wrinkles, expression lines, increase skin elasticity, and improve skin sagging.
LED machine treatment needs to avoid:
- Childbirth and pregnancy.
- People with bleeding tendency.
- Customers with autoimmune system diseases or albinism are prohibited from using it!
- Customers with photosensitive constitutions are prohibited from using it!
- Stop using it immediately if metabolic disorders and the light-induced rash caused by them occur!
- Customers who are taking photosensitivity drugs are prohibited from using it!
5. Basic parameters of LED phototherapy machine.
5.1 Function item selection.
The working function items can be selected (adjusted parameters), and the selectable parameters include light color (red light, blue light, green light, purple light, yellow light, near infrared light, orange light), POWER (output power), TIME (timing time) and the position of the machine treatment panel (can be moved up and down).
5.2 Parameter adjustment setting.
After selecting the function item, press the button “+” or “-” to adjust the parameters of the selected function item in increments or decrements.
5.3 The light output type can be set.
RED: 630nm wavelength, red LED phototherapy.
BLUE: 460nm wavelength, blue LED phototherapy.
GREEN: 520nm wavelength, green LED phototherapy.
YELLOW: 595nm wavelength, yellow LED phototherapy.
5.4 POWER (output power) can be set.
The unit of output power: MW/CM2.
5.5 TIME (timing time) can be set.
Timing light: 01~60 minutes.
6.LED phototherapy machine operation interface.
Light type setting: Press the corresponding light wavelength button “RED (red light), BLUE (blue light), GREEN (green light)”, and the button color will turn black, indicating that the black button is the currently selected light type wavelength.
POWER (output power): After selecting the light type wavelength, the light output power can be adjusted by the “+” or “-” key below POWER.
TIME (timing time) setting: After selecting the light type wavelength, the light output time can be adjusted by the “+” or “-” key below TIME, which can be adjusted from 01 to 60 minutes.
START/STOP (start, stop) control: Press the “START” button to control the device to emit light, and press the “STOP” button to stop the device from emitting light.
If you press the “STOP” button in the “START” state, the device will stop emitting light and stop the countdown; in addition, when the countdown is 00 in the “START” state, the device will automatically switch to the “STOP” state and emit three beeps.
If the remaining time value displayed is not 00, if you shortly press the “START” key in the “STOP” state, the buzzer will sound and the device will switch to the “START” state. The remaining time display will be displayed in a countdown manner from the last stop time; if the remaining time value displayed is 00 or you want to restart the timing from the set timing value, you need to press the “STOP” key and adjust the time using the “+” or “-” under TIME.
7. Equipment maintenance and fault diagnosis.
Keep the light-emitting surface of the irradiation plate transparent and clean. If there is dirt, use a soft dry cotton ball or a cotton ball wet with a neutral detergent to deal with it. It is strictly forbidden to use diluents such as alcohol.
Use a soft cotton ball wet with a neutral detergent to clean the outer surface of the machine at least once a week.
During the cleaning process, care should be taken to prevent liquid from penetrating into the machine.
Machine error | Possible causes | Solution |
No display, no buzzer sound. | The power cord is not connected well | Check if the power cord is connected well |
The power socket is not connected properly | Replace the fuse and restart the machine. | |
Fuse blown | ||
LED irradiation plate no light output | Check the connection wires and connectors of the irradiation board | Reinstall the irradiation board connection wire and connector |
System self-test failed | Please record the fault information displayed on the display | |
The system does not respond when I press the buttons on the display. | Please contact Litonlaser’s customer service department. |
During the treatment process, if a few or a string of LEDs are found to be non-luminous, the treatment can continue without affecting the patient’s treatment effect. If more than one string of LEDs is found to be non-luminous, please stop using it and contact Litonlaser’s customer service department.
8. Recovery after LED phototherapy.
The postoperative recovery of LED phototherapy is mainly based on hydration and moisturizing. We can also use the 2% Boleda nourishing conditioning mask during treatment. Apply it to the treatment area first, then irradiate the LED light. After the treatment, wash it clean, apply the raw collagen mask, and finally use ceramide spray and squalene products to moisturize and lock in moisture.
9. Answers to common questions about LED light therapy machines.
Q: How to use led light therapy?
A: LED light therapy machines can perform light therapy in multiple colors. You only need to turn on the machine, select the wavelength color, set the treatment time, adjust the height of the machine, and turn on the irradiation to use it.
Q: Where is the best professional LED light therapy machine?
A: Litonlaser produced the first LED light therapy machine as early as 15 years ago. After years of accumulation, our machine has stable light output, strong energy, and can be equipped with clinical treatment plans for customers. It is very reliable and is a professional LED light therapy machine manufacturer.
Q: Does led light therapy work on face?
A: Yes! LED light therapy is mainly for facial skin treatment, including facial acne, anti-aging, skin rejuvenation, and treatment of skin sensitivity, which are all treatments for the face.
Q: Does at home led light therapy work?
A: The effect of home LED light therapy beauty instrument is average. Because the machine is small, the energy of the built-in lamp beads will not be too strong, resulting in insufficient energy density, so the treatment effect will be limited. If you need to consider good treatment effects, you need to buy a large machine.
Q: Can I use led lights for red light therapy?
A: Red LED light therapy refers to the use of a professional LED light therapy machine, using 630 nm wavelength red light for treatment, so not all LED machines can perform red light therapy, you need a professional LED light therapy machine.
10. How to choose the best professional LED light therapy machine?
The effect of LED light therapy depends to a large extent on the quality of the machine. A good LED machine needs to have stable energy and precise wavelength.
Litonlaser’s professional LED light therapy equipment has 3 or 4 lamp boards. The energy of each lamp bead is 5w, and the energy density of various colors of light is more than 100 mW/cm2. The energy is very strong and there is no doubt about it.
In addition, we should also pay attention to the service life of the machine. Litonlaser’s LED beauty machine usually has a 3-year warranty, and with the feedback of many customers and time, there will be basically no problems within two years.
If you need to purchase the best professional LED light therapy machine, feel free to contact us: Medical Devices & Equipment Manufacturers.