Fractional CO2 Laser Skin Resurfacing Machine

Fractional CO2 Laser System Light Guide Arm

Fractional CO2 Laser System RF Tube and Glass Tube

Fractional CO2 Laser Skin Resurfacing System Handle

Fractional CO2 Laser Skin Resurfacing Clinic Equipment

CO2 Fractional Laser Skin Resurfacing System

RF CO₂ Super pulse fractional laser is the newest laser-skin-resurface technology. It adopts RF exciter CO₂ laser to change the laser source’s physical medium and emission mode.
During the treatment, hundreds of evenly and orderly micro-level pulse laser beam acts on the treated skin area.
Photothermal effect and micro-invasive effect can accelerate collagen re-growth, and start up the cell’s self-regeneration, stimulating the cell’s metabolism, which makes the skin resurface again.

Get A Free Quote

CO2 Fractional Laser Skin Reurfacing System Description

Differences Between RF And Glass CO₂ Laser Tubes:

1.Cost & Maintenance:

RF Laser Tubes have higher initial costs, but require less frequent maintenance，lower long-term maintenance costs.

Glass Laser Tubes have lower initial costs, but require more frequent maintenance，higher long-term maintenance and replacement costs.

2.Durability:

RF Laser Tubes are more durable with a longer lifespan.

Glass Laser Tubes are less durable and prone to breakage.

3.Performance:

RF Laser Tubes have finer beam quality, precision, and speed pulsing, RF laser tubes are better for engraving.

Glass Laser Tubes are adequate for many applications, but less precise and slower pulsing.

$fractional co2 laser tube$

CO2 Laser Facial System Characteristics:

Adpot revolutionary three-dimensioned fractional laser technology, safe treatment, and obvious result.
Adpot high-power and super stable laser head, so output power is very high.
Multi-fractional modes.
Adpot adjustable rectangular pulse width control technology to precisely control pulse and to strictly control heat transfer.
Personalized user interface design for screen, suited to different customer needs.
Non-invasive treatment, faster recovery and safer treatment.

Treatment Range of CO2 Fractional Laser Machine:

Laser resurfacing: Start a skin microexfoliation treatment under fractional mode, and meantime, make collagen renewal through heat stimulation of fractional laser, and finally skin gets tender and more elasticity.
Wrinkle removal: Our CO2 fractional laser can remove the wrinkles around mouth, eyes, forehead, etc.
Freckle removal: fractional Our CO2 laser can also dilute various freckles like chloasma, freckles, coffee spots, age pigment and the actinic keratoses. Remove skin neoplasms, Syringoma, sebaceous gland tumor, Becker nevus, and seborrheic keratosis

CO2 Laser 10600 nm Clinical Applications:

To improve skin texture, shrink pores, make the skin smooth and tender
To tighten face and neck, with the function of face-lift and enhancement.
To remove fine wrinkles around eyes and mouth.
To treat surgical and acne scars.
To whiten face and remove pigmentation.

Huafei LT-803 Technical Specification

Model NO.	LT-803
Laser type	Glass tube CO2 laser
Wavelength	10600nm
Beam-divergence angle	5.5mard
Cooling system	Water + Air cooling
Laser Power	1~30W,1W/step.Deviation ±10%
Indicated light wavelength	650±5nm(Diode)
Normal mode	Output type	Single pulse, Continuous pulse, Multiple pulse, Super pulse
	Pulse width	10~500ms(Adjustable)
	Pulse interval	0.2~1.5s(Adjustable)
Scan mode	Output type	Graphics scanning
	Laser pulse width	1~50ms(Adjustable)
	Power	1~30W(Adjustable)

CO2 Laser Skin Resurfacing Machine Details

RF Fractional CO2 Laser Beauty Machine FAQs

Q: What is CO2 laser?

A: CO2 fractional laser is a minimally invasive treatment between invasive and non-invasive. Its principle is: carbon dioxide laser, with a wavelength of 10600nm, belongs to the infrared spectrum, and has a very high absorption rate for water, which accounts for about 70% of biological tissues; laser is emitted in a scanning dot matrix mode. When the laser acts on the skin, it quickly converts light energy into heat energy, forming orderly vaporization holes in the skin epidermis. The laser beam penetrates into the dermis, activates the skin’s damage repair mechanism, effectively stimulates the synthesis of new collagen fibers and collagen remodeling, and promotes epidermal regeneration, thereby achieving the effect of repairing and improving the skin, making the skin firm, delicate and elastic.

Q: What is CO2 laser treatment?

A: CO2 fractional laser treatment uses high-energy laser to penetrate the epidermis and reach the dermis. The collagen in the dermis absorbs the energy and generates high heat, which causes the collagen to shrink (tighten the skin). At the same time, the high heat causes some surrounding cell tissues to be damaged and die. Then, the skin starts to repair itself and improves acne pits, scars, and wrinkles through the process of regenerating collagen.